Описание:

Електронният нивелир определя с точност ъгъла н отклонение по хоризонтала и вертикала.Има специален режим на измерване на относителни ъгли,между две произволни избрани повърхности (например между повърхноста на работната маса и режещия диск).

Уредът може да се използва за подравняване на настолни отрезни машини спрямо работната повърхност,монтаж на скари за гипсокартон или окачени тавани,дърводелски изделия,строителство и др.Уредът може да се калибрира самостоятелно.

Specifications:
3pcs of magnet on the base
Range: 0 ~ 90° x 4 quadrants (360°)
Resolution: 0.1°
Operating Temperature: 0 ~ 40 ℃
Operating Humidity: 40 ~ 80% RH
Power: 2 x 3V CR2032 Batteries (not included)
Dimensions: approx. 55 X 55 x 15 mm

Description:
The item is a digital protractor, mini digital level.
Applications:
Drainage angles and run-off slopes
Tool setting on Lathes
Setting blade angle of Circular Saws
Setting blade angle of Miter Saws
Setting work piece angle for milling
Platform monitoring
Check drill press table setting, table saw, jointer table, band saw, jointer fence or band saw table
You can even put it into your clothing pockets for field works

Features:
Ultra-slim size
Portable design & simple operation
Built-in 3pcs of strong magnet for attaching on metal surfaces
High accuracy and resolution
Degree and Percentage of slope in conversion
Absolute & relative measurement modes
Large and clear LCD display
Measured data hold
Calibrate button to calibrate the meter to any reference surface
Displayed readings remain upright to enable easy viewing at all angles

Note:
1.The battery should be taken out for storage if the instrument will be kept idle for a long time period.
2.When power is low, the battery symbol flashes, please replace the batteries as soon as possible.
3.Since this product was only applies to two-axis measurements, in the third axis ( foot level front and back side) and at the horizontal angle was less than 45 °, the LCD will display an error message “Err”.

Included:
1 x Mini Digital Inclinometer (batteries not be included)
1 x Instruction Manual